Author Topic: Body Trim Panel ID Needed!  (Read 2834 times)

guest997

  • Guest
Body Trim Panel ID Needed!
« on: August 04, 2009, 10:01:27 AM »
Hi everyone, I'm new here  :).  We've recently bought our first Jazz ('55 plate, 1.4), and we're loving it! 

Last weekend we went for a long drive up the motorway, we heard a rubbing noise from underneath and had to stop.  A piece of black plastic trim from underneath the front apron had come loose, apparently due to a missing bolt, and was dragging on the ground.  As it was cracked and broken, we snapped it off and continued our journey, but it kept flapping and clearly needs to be replaced. 

I was hoping you could help us identify the part, so that we can source a replacement.

Thanks.  :)

bill888

  • Approved Member
  • *
  • Posts: 366
  • Country: england
  • My Honda: SOLD in 2026. Owned from new 57 Jazz 1.4 SE cvt (21k miles)
Re: Body Trim Panel ID Needed!
« Reply #1 on: August 04, 2009, 11:05:17 AM »
If it is the large irregular shaped black plastic sheet located just behind the front bumper, my manual describes it as a 'splash shield'.  It is held in place by 10 screws and snap on fixings.


guest997

  • Topic Starter
  • Guest
Re: Body Trim Panel ID Needed!
« Reply #2 on: August 04, 2009, 02:15:30 PM »
Thank you!  Spot on!  ;D

Tags:
 

Back to top