How to disable the PI SEEK function

[RichardA]

My radio displays 'PI SEEK' when a station is selected from the presets and takes around five seconds to find the station. It only happens with Radio 1, never on Heart.

I know it's an auto-tune function of some kind, triggered by the radio restoring to factory defaults after replacing the battery. I did turn it off before but I can't remember how to do it and I can't find anything in the manual. Any ideas please?

It's a 2007 Jazz with the big button radio/CD unit.

Thanks.

[guest334]

Likely to be within the menu for the radio/RDS functions, so lots of pressing > /? and ****ing when you have 15mins to waste.

[guest255]

I get the same prob sometimes, would i tend to do is if you press the preset button again it sometimes tunes into the station.

I believe its something to do with weak signals hence the 'PI SEEK' appearing.

Try removing the RDS function.


http://www.radio-electronics.com/info/broadcast/rds/radio-data-system-basics-tutorial.php

[RichardA]

Found it - press the POWER/VOL knob for more than two seconds and change the AF setting to OFF.

You can also change the clock format between 12 and 24 hour format from this menu.

More here:
http://clubjazz.org/forum/index.php?topic=6852.0