« previous next »
Pages: [1]

Author Topic: Rear hatch inner panel removal  (Read 1081 times)

Brakballe

  • Approved Member
  • *
  • Posts: 137
  • Country: no
  • My Honda: Honda Jazz II GG3
Rear hatch inner panel removal
« on: May 31, 2025, 10:45:34 AM »
Had a hit & run whilst parked few days ago and want to remove the inner panel for inspection and possibly straighten the dent some.
Has anyone here done that? Eventually how much is just clips and where is the the screws needed to be removed?
I see there is a small cover in the lower center of the panel but not much else.
Any advice? :)
Report to moderator   Logged

Brakballe

  • Topic Starter
  • Approved Member
  • *
  • Posts: 137
  • Country: no
  • My Honda: Honda Jazz II GG3
Re: Rear hatch inner panel removal
« Reply #1 on: May 31, 2025, 01:19:40 PM »
Seems I'm too lazy. A quick search on YT revealed this:
Report to moderator   Logged

GBH

  • Approved Member
  • *
  • Posts: 251
  • Country: gb
  • My Honda: 2010 1.4 EX i-VTEC i-SHIFT SemiAuto
Re: Rear hatch inner panel removal
« Reply #2 on: June 01, 2025, 09:33:36 AM »
Had to remove that panel when I fitted a reversing camera and found that the plastic fittings were quite brittle - someone had obviously been there before me and one of the fittings was broken.
Report to moderator   Logged

Keekster71

  • Approved Member
  • *
  • Posts: 140
  • Country: gb
  • My Honda: Jazz
Re: Rear hatch inner panel removal
« Reply #3 on: June 03, 2025, 01:51:38 PM »
Put a smear of grease on the clips before refitting
Report to moderator   Logged
We live on a placid island of ignorance in the midst of black seas of infinity, and it was never meant that we should venture far." H P Lovecraft
Pages: [1]
« previous next »
Tags:
 

anything
Back to top