Author Topic: How to configure a lock and unlock feature buttons in Jazz Key's  (Read 5112 times)

guest1145

  • Guest
How to configure a lock and unlock feature buttons in Jazz Key's
« on: November 29, 2009, 10:14:07 PM »
Hi Everyone,
I do not think happened to anyone yet and I hope never happens, but if by chance, your key for some reason lose the alarm and the activation of the door locks. Learn how to reprogram it without having to go to the dealership.

How to program the alarm control of the New Jazz

What is needed
- The spare key that must be functioning normally

How to program
1 - Put the spare key that works on contact and on the other hand is the key that lost programming.
2 - At the same time turn the key in the ignition to position II and press the button to lock the car (lock symbol) key that without programming

3 - Return the key to position 0. Steps 2 and 3 shall be made in less than 5 seconds.
4 - Repeat this step two more times
5 - The third time you are doing this procedure,
see that the key is programmed, because it can command the latches of the doors.
6 - To save at the end of this cycle press press the lock (lock symbol) key that without programming. Steps 5 and 6 also can not take more than 5 d seconds.

Note: If Jazz models produced in the world doesn't have the system Keyless like a used in the Fit Japanese, American and Brazilian, this procedure might not work

But it is worth testing. if they need one day.


Tags:
 

anything
Back to top