Clubjazz - Honda Jazz & HR-V Forums

Honda Jazz, HR-V & Hybrid Forums => Honda Jazz Mk3 2015 - => Topic started by: Clifford65 on August 11, 2017, 05:05:05 PM

Title: Mobile phone holder
Post by: Clifford65 on August 11, 2017, 05:05:05 PM
Hi ..I have a 2017 model Honda jazz ...the trouble I'm having is finding a phone holder for the car that fits onto the vents .. I'd prefer a vent mounted holder as I don't really want anything on the windscreen or on the dash ... the problem is the air vents in the jazz have a chrome effect on them ...which makes them thicker ...and harder to find a vent mount that can grip on ... I have even tried a belkin vent mount at 20 but struggled to get that to grip to the middle part of the vents ...as I want to use the phone in landscape mode at times for use as a sat nav ...I'm using a iPhone 6 Plus ...any advice much appreciated ..thanks
Title: Re: Mobile phone holder
Post by: Skyrider on August 11, 2017, 06:07:52 PM
I have a Brodit device holder which I have attached to the vertical separator between the center vents with hot melt glue. I use it for my Tomtom satnav, it provides an absolutely solid vibration free mounting. When the time comes to remove it a drop of surgical spirit (alcohol) will  release the bond.
Title: Re: Mobile phone holder
Post by: trevflstn on August 11, 2017, 07:49:38 PM
I have a 2016 Jazz which has the cd player fitted. I use a phone mount that locks into the cd slot as i use the usb input for music. Works great on Samsung Note sized phones.
Title: Re: Mobile phone holder
Post by: Jocko on August 11, 2017, 08:14:18 PM
I have a 2016 Jazz which has the cd player fitted. I use a phone mount that locks into the cd slot as i use the usb input for music. Works great on Samsung Note sized phones.

My works van has the same. It is excellent.
Title: Re: Mobile phone holder
Post by: Clifford65 on August 12, 2017, 08:19:18 AM
My Honda jazz ex doesn't have a CD player ....it's only 2 weeks old ... the sales rep did tell me ..that the updated Honda connect has shrunk in size from 7 inch to 6 inch but it is more resonsive and now has volume buttons and home buttons instead of touch type and USB connections on the head unit ...and no longer has a CD player as they are gradually being phased out over all the models .... so nice idea about using a cd type mount for phone but without a CD player it is not possible ..
Title: Re: Mobile phone holder
Post by: andruec on August 12, 2017, 05:27:11 PM
I have one of these:

https://m.alibaba.com/guide/shop/ultimateaddons-air-vent-swivel-car-kit-mount-holder-for-htc-sensation-smart-phone_4907057.html

Bought several years ago on Amazon but no longer available. It slips from side to side a bit on the vent over time but doesn't fall off. In fact the big problem came when I sold my last Jazz and had to struggle to unclip it.
Title: Re: Mobile phone holder
Post by: ColinB on August 13, 2017, 08:45:33 AM
If neither the air vent or the CD option is practical, another option is the driver's side cup-holder. I use one of these ...
https://www.amazon.co.uk/gp/product/B00YLREM2U/ (https://www.amazon.co.uk/gp/product/B00YLREM2U/)
... but other similar devices are available. You can bend the long neck to position the phone to be easily accessible for nav purposes without obstructing any vents or visibility. Just be careful not to over-tighten the base in the cup-holder.

You can also get flat-topped cup-holder mounts to take a bigger suction mount if your phone is too big for the jaws on that one:
https://www.amazon.co.uk/Universal-Suction-Mounted-Android-Smartphones-Windscreen/dp/B007IVZX6K/ (https://www.amazon.co.uk/Universal-Suction-Mounted-Android-Smartphones-Windscreen/dp/B007IVZX6K/)
Title: Re: Mobile phone holder
Post by: botio on August 13, 2017, 12:09:47 PM
The best I ever used is this one: http://amzn.eu/5SKmwWr (http://amzn.eu/5SKmwWr)
it's cheap, holds the phone very well and it's very easy to put and remove the phone with one hand.
Title: Re: Mobile phone holder
Post by: pb82gh3 on August 13, 2017, 12:34:24 PM
I made a TomTom satnav holder with a lollipop shaped piece of perspex embedded in quick setting cement moulded to the shape of the drivers side cup holder. I bored out some of the cement to reduce weight and strain on the cupholder, but leaving enough weight for it to be very stable. I wrapped the cement in thin polythene to avoid marking the cupholder. This works well, but at night there is a reflection of the screen in the drivers door mirror. Next stage is either angle the screen or an L shaped piece of card attached to the right hand side of the TomTom.
Title: Re: Mobile phone holder
Post by: Skyrider on August 13, 2017, 01:20:47 PM
I can not tolerate anything that moves or vibrates when attached to the dashboard. I have a CD slot mount which vibrated when tried in my last two cars and I have not tried it in the Jazz. For any DIY capable folk some plumbing fittings are made of ABS plastic which can be solvent welded and painted black. They can be easily cut up and all manner of repairs and devices can be made. Hot melt glue can be used to semi permanently attach stuff to the car, my garage door remote control and satnav mount for example.