Clubjazz - Honda Jazz & HR-V Forums

Honda Jazz, HR-V & Hybrid Forums => Honda Jazz Mk3 2015 - 2020 => Topic started by: plasma on July 09, 2020, 04:03:14 PM

Title: under tray
Post by: plasma on July 09, 2020, 04:03:14 PM
just done a oil and filter change, and I must say  that the under tray and how its fix'ed is a load. Of crap.

Plasma.
Title: Re: under tray
Post by: equaliser on July 09, 2020, 09:14:41 PM
just done a oil and filter change, and I must say what that under tray and how its fix'ed is a lad of crap.

Plasma.

I know, I had to remove it today after loosing a nut. I don't know how those two plastic fixings at the rear don't just fall out!
Title: Re: under tray
Post by: monkeydave on July 10, 2020, 01:39:07 AM
so its got 4 metal screws on the edges and 2 plastic ones at the back?
Title: Re: under tray
Post by: Jocko on July 10, 2020, 08:31:43 AM
My Mk1 has plastic fixings all round. As long as you know what to do they are easy to remove and even easier to replace.

(https://i.ebayimg.com/images/g/jEEAAOSw0vVdTCtp/s-l500.jpg)
Title: Re: under tray
Post by: equaliser on July 10, 2020, 10:28:38 AM
so its got 4 metal screws on the edges and 2 plastic ones at the back?

Yes, but those plastic fittings at the back are so dodgy looking I'm going to be checking they are still there after every trip!

Jocko - If those clips were fitted I wouldn't have any concerns but the MK3 has the most inadequate clips I've ever see (only at the back, the six others are speed nuts with self tappers)
Title: Re: under tray
Post by: Muldoon on July 10, 2020, 12:16:34 PM
Can you replace the plastic rear ones with any metal alternatives? The metal captive tab which you can then put a screw into and tighten up? Those plastic fittings with the lugs which expand when the plastic screw is tightened are very weak and tend to snap off.