Clubjazz - Honda Jazz & HR-V Forums

Honda Jazz Forums => Honda Jazz Mk1 2002-2008 => Topic started by: guest5667 on September 25, 2015, 04:20:26 PM

Title: No Signal From Driver Side Impact Sensor (SRS Fault code 13-3)
Post by: guest5667 on September 25, 2015, 04:20:26 PM

Hi,

I have Honda Jazz 2005. It has airbag light on. in diagnosis, it shows [13-03 No Signal From Driver Side Impact Sensor] fault.

Probably some bad connection or broken wire is causing this fault. Does anybody has experience or idea to resolve this problem?

Regards,
Awais

Title: Re: No Signal From Driver Side Impact Sensor (SRS Fault code 13-3)
Post by: CRC on October 08, 2015, 11:47:15 AM

I had some problems a while ago with a seat belt pre-tensioner that was giving a low reading and got to know a bit about the SRS system on a 53 plate Jazz.

I've attached a pdf which goes some way to explaining the system and how to replace things.

Really frustrating working on an SRS system as all the experts say that under no circumstances should you use a digital multi meter to test any resistances, reason being that the voltage introduced from the DMM can cause the pyrotechnics to go bang. 

Also, be very aware that "drivers side" can mean anything ..... if the diagnostics software is American then it will probably  mean "UK passengers side". I fell into that trap.

[attachment deleted by admin]

Title: Re: No Signal From Driver Side Impact Sensor (SRS Fault code 13-3)
Post by: guest5667 on October 19, 2015, 01:23:49 PM

Thanks.
Seems like a rare issue.

Title: Re: No Signal From Driver Side Impact Sensor (SRS Fault code 13-3)
Post by: guest5667 on December 23, 2015, 12:09:39 AM

During replacement of sensor I found that Driver side means passenger side for UK cars.