Clubjazz - Honda Jazz & HR-V Forums

Honda Jazz Forums => Honda Jazz Mk3 2015-2020 => Topic started by: Billy on August 04, 2025, 05:07:23 PM

Title: Oil change
Post by: Billy on August 04, 2025, 05:07:23 PM

Folks ,
I am going to do a oil&filter change , could somebody please tell me which type of plastic  pins hold the underside shield , just incase i break a few  :D
Many thanks - Billy.

Title: Re: Oil change
Post by: fatlad on August 04, 2025, 11:51:07 PM

hi Billy

this may help
https://vehicleclips.co.uk/collections/honda-car-trim-clips-fixings-fasteners?srsltid=AfmBOooyw13dzlf7gdYrt3YZVP1C6x4sQiM0v1-cS5I_ct-t8x-VtgRb

Title: Re: Oil change
Post by: HertsHonda on August 05, 2025, 12:44:44 PM

Was concerned that even expanded the clips might not be a tight fit.
Managed to size the hole in the metal cross member using the shank of a drill bit.
Rejected some clips offered by a Honda Dealer (his IT was down so could not get part number!)
From memory think the unexpanded diameter was 12mm - best do your own checking!!

Title: Re: Oil change
Post by: pebbles on August 05, 2025, 07:16:15 PM

The 2 rear ones are 10mm and I think the fronts are too.

Here's a photo of the genuine Honda rear undercover fixings , 10mm wide , 10/12 mm long

Title: Re: Oil change
Post by: Billy on August 06, 2025, 12:39:54 PM

That's great
Many thanks guys

Title: Re: Oil change
Post by: monkeydave on August 06, 2025, 11:03:22 PM

Quote from: pebbles on August 05, 2025, 07:16:15 PM

The 2 rear ones are 10mm and I think the fronts are too.

Here's a photo of the genuine Honda rear undercover fixings , 10mm wide , 10/12 mm long

you dont touch the front plastic clips to take the undertray off

there are 3 metal screws each side and a plastic 10mm on each side at the back