Clubjazz - Honda Jazz & HR-V Forums
Honda Jazz Forums => Honda Jazz Mk1 2002-2008 => Topic started by: proud infidel on September 20, 2019, 05:34:09 AM
-
im looking for a ecu pin data diagram to check every wire for a short or ground thats not letting my scanner connect to my ecu, wny help would be appreciate it guys!
-
hi i have found https://www.man4car.com/1450167530/manual-Honda-Jazz-Honda_Jazz_III_3_Fit_II_manual
https://www.manualslib.com/download/811004/Honda-Jazz.html
hope this helps
-
thanks, but they are owner's manual and i am looking for a repair one. thanks anyway!
-
Have you tried the US Fit forum?
https://www.fitfreak.net/forums/ (https://www.fitfreak.net/forums/)
-
You may be able to find what you need here http://www.hondafitjazz.com/manual/A00/HTML/00/SAA2E00000000000000ZDAT00.HTML (http://www.hondafitjazz.com/manual/A00/HTML/00/SAA2E00000000000000ZDAT00.HTML)
-
Here's a pinout for the pre-CANBUS Honda OBD connector
https://pinoutguide.com/CarElectronics/honda_obd_2_pinout.shtml
However... when I was fiddling with a Chinese J2534 interface and an old version of HDS, i found that the ISO9141 protocol K-line used by the ABS, SRS, etc is connected to pin 14, not pin 7 as shown on the pinout.
-
thanks everyone for the info, im gonna check them this evening!