Clubjazz - Honda Jazz & HR-V Forums

Honda Jazz Forums => Honda Jazz Mk1 2002-2008 => Topic started by: guest8326 on March 10, 2019, 08:45:40 PM

Title: grinding sound
Post by: guest8326 on March 10, 2019, 08:45:40 PM

Hello everybody, I own a Honda Jazz and I have a problem with it when accelerating in 4th and 5th gear you can hear a grinding noise between 2000 and 2500 RPM. There is no sound below and above the mentioned RPMs. The sound goes away when I slightly press the clutch pedal. Clutch set is changed with an aftermarket one and the input shaft bearing is also changed with original parts from Honda. Please advise what the problem might be and how serious it is.

Title: Re: grinding sound
Post by: Jocko on March 10, 2019, 09:00:22 PM

Hello Pando. When you say "the input shaft bearing", are you referring to the gearbox input shaft or do you mean the clutch release bearing?

Title: Re: grinding sound
Post by: guest8326 on March 11, 2019, 05:46:18 AM

Both are replaced.

Title: Re: grinding sound
Post by: Jocko on March 11, 2019, 06:59:08 AM

So the gearbox has been rebuilt and the bearings and seals replaced? Hopefully that will remove a lot of the possible issues.

Title: Re: grinding sound
Post by: guest8326 on March 11, 2019, 11:04:19 AM

The problem appeared after the change of the bearings. I asked i few repair shop and they do not know were the problem is, so i am looking for advice what to do. Honda dealer is very expensive and they do not tell what the problem is.

Title: Re: grinding sound
Post by: Jocko on March 11, 2019, 11:13:11 AM

Do you trust whoever changed the gearbox bearings?

Title: Re: grinding sound
Post by: guest8326 on March 11, 2019, 11:34:20 AM

Yes because i attented the change and personally checked the other bearings.The mechanic was reserved about the clutch set becouse is aftermarket not original from honda.