Author Topic: Immobilizer issue  (Read 913 times)

guest7862

  • Guest
Immobilizer issue
« on: August 09, 2018, 10:43:39 PM »
Hi all. I am in a bit of a bind. Hoping you can help.

I have a 2002 jazz 1.2 and the ignition key would not turn. I ended up taking apart the ignition cylinder and removing the broken wafer. When I took it back out to test it seemed to work just fine. Then when I screwed it all back together it will crank but not start and the green key is blinking.

I ordered a new ignition cylinder only to realize that needs to be synced to the ecu. At this point what are my options? Im looking for the cheapest solution possible!

Thanks!

Jocko

  • Approved Member
  • *
  • Posts: 9356
  • Country: scotland
  • Fuel economy:
  • My Honda: Died from rust.
Re: Immobilizer issue
« Reply #1 on: August 10, 2018, 07:35:12 AM »
Welcome. There is normally a sensor ring round or in the vicinity of the barrel which detects the key. Something like this:

Check you have not disturbed the wiring.
The only things that are paired are the ECU and the key chip.

Tags:
 

anything
Back to top