Author Topic: Camera installation (Read 2500 times)

guest5850 · « **on:** January 07, 2016, 04:14:00 PM »

Hi,
I want to install a reverse camera on my jazz and I wanted to ask if someone can give me a little bit help on how should I do it.
Do I need to pull out all the black plastic on the back door to wire the cables to the reverse lamp?

Hope you can help....

Ozzie · « **Reply #1 on:** January 07, 2016, 05:24:14 PM »

Not the rear door, but inside the boot. You should be able to access the light quite easily.

guest5079 · « **Reply #2 on:** January 09, 2016, 11:14:58 AM »

When I installed my rear parking 'bleepers' I removed the cover from the offside rear light cluster. I should buy some trim removal tools. (dirt cheap off E bay) as the plastic marks very easily. The cover came off with no problem. I soldered the wire from the 'bleepers brain to the reversing light cable and all went well. I was advised to make the join as close as possible to the actual light. Tech boys will probably know why.
Alternatively I would presume a 'scotch blok? would do the job.