Clubjazz - Honda Jazz & HR-V Forums
Honda Jazz Forums => Honda Jazz Mk1 2002-2008 => Topic started by: Richie on February 24, 2024, 03:23:28 PM
-
HI,
New member so apologies if this is already answered but I cant seem to finds it.
I have to replace the centre section of my 2007 Honda Jazz 1.4 GE3 but I am struggling to find out what parts I will need (apart from the actual exhaust section) and also where to buy them. There seems to be a lot of site that sell the middle section itself but not any of the extra stuff like bolts/gaskets/clamps
Anyone care to share a site that will supply the necessary and, if its not too much trouble, what parts I will need (clamps, gaskets etc)?
Much appreciated
-
Can the exhaust be repaired,or have you asked around at local breakers yard. Last suggestion try Honda Dealerships clearing out old stock. First call coxmotorparts.
Avoid any parts from China
-
The disadvantage of fitting yourself , apart from the problems of safely working under the car, is things dont always go to plan. Things may not separate easily, needing heat or cutting , a replacement part may not fit existing pipes exactly without some 'fettling' , a part you had expected to retain gets damaged during dismantling etc. And find various rubber suspenders etc perished or missing even on sections you are not replacing.
You could have a half completed job delayed for days waiting for extra parts to be delivered , or buy more bits than you actually needed. Good savings can be made DIY and although if you were only changing a rear section it may be relative trouble free it can be a pig of a job.
-
HI,
New member so apologies if this is already answered but I cant seem to finds it.
I have to replace the centre section of my 2007 Honda Jazz 1.4 GE3 but I am struggling to find out what parts I will need (apart from the actual exhaust section) and also where to buy them. There seems to be a lot of site that sell the middle section itself but not any of the extra stuff like bolts/gaskets/clamps
Anyone care to share a site that will supply the necessary and, if its not too much trouble, what parts I will need (clamps, gaskets etc)?
Much appreciated
I had to spend about £80 on ebay for a noname exhaust pipe and fitting kit seperately (£60ish and £20ish respectively)