Clubjazz - Honda Jazz & HR-V Forums
Other Hondas & General Topics => Off Topic (Non-Honda) => Topic started by: Kremmen on January 21, 2022, 10:49:57 AM
-
I've noticed over the years that my decade+ old Nilfisk 130 was getting stiffer to assemble and disassemble. The last use a few days ago was almost impossible.
I was about to go to Argos and get the latest C135 but I thought I' have a closer look at mine.
After some poking and prodding I noticed that the small rubber O rings were very stiff, almost plastic like.
I replaced them and it's like it was when new, easy to assemble and disassemble. Just clicks together :)
Proper Job.
-
Silicone grease also a great help if applied regularly, will also be absorbed by the rubber which also helps sealing.