Hi All, my first post

Today I put a super bright COB LED strip in my Honda Jazz GD boot. Got that ideal from
http://www.fitfreak.net/forums/fit-interior-exterior-illumination/90453-putting-led-s-cargo-area.html. But I used a 12V 4W super bright COB LED strip instead, the result is amazingly useful boot light.
Cost = 99p COB LED + led connector female & male Plug (99p for 5) + a bit of cable = £1.20

First solder a long length of twin cable to the LED strip then solder half of the LED connector at the end, then tap it under the boot cover


Close up pic at the end

Then prepare the other half of the connector


Close up pic at the other end cable with a spare 501 led plastic holder

Insert it though the boot side plastic trim (unscrew 2 screws)

Catch the other end though the original boot light hole, then plug in the led holder end to the boot light holder. Plug the socket back to the boot light holder.

At the end only small piece cable exposes above the boot cover, no cutting of factory parts. Also can remove the boot cover anytime.

Final result
