Recent Posts

Pages: [1] 2 3 ... 10
1
Honda Jazz Mk1 2002-2008 / Re: too much road noise
« Last post by Rory on Today at 11:40:00 AM »
Hi,
I'm happy enough with my 2004 jazz but it makes a terrible racket when on the motorway, it's not the car but roadnoise. Does the 2nd gen filter it out any better? (i'm using quality cross climate+ tyres so theyre not the issue).

The very early Jazz's did have some suspension mounts changed but I think that was to do with harshness rather than noise.    We had a 53 reg and were assured it had the new mounts so your 2004 should have them.

I put Cross-Climate tyres on daughters Golf and thought they were quiet.

There's a website where someone went a bit bonkers soundproofing a Jazz - http://www.hondafitjazz.com/dead2.html

I'd say our mk2's are much quieter and altogether more comfortable.  I had a basic mk3 the other day as a courtesy car and that was noisy, and very cheap feeing.
2
Honda Jazz Mk1 2002-2008 / Re: too much road noise
« Last post by culzean on Today at 10:50:34 AM »
Jazz never struck me as a noisy car, I have had tyres in the past on newish cars ( OE fitted tyres ) that have been very noisy and as soon as they wore out I replaced them with quieter ones and difference was huge - why do car makers fit noisy tyres as OE ? Many of the complaints from reviewers are about road noise and for people reading reviews it can be the difference between buying a car or not.   It is only on some particularly rough road surfaces that road noise is intrusive,  on majority of roads hardly notice it.
3
Honda Jazz Mk1 2002-2008 / Re: runs then stops
« Last post by Fouldsy67 on Today at 10:11:50 AM »
planing on doing that tomorrow thought it was strange but makes sense reads to hot and adjusts timing and fuel to suit and adjust to much and not running we did notice when codes where cleared and we tried to re start it was backfiring

so is this the one in the block at the front behind the starter 
4
Honda Jazz Mk1 2002-2008 / Re: runs then stops
« Last post by Jocko on Today at 09:43:11 AM »
po118 is engine coolant temperature, so swap over the temperature sensor from the old block.
5
Honda Jazz Mk1 2002-2008 / Re: too much road noise
« Last post by Jocko on Today at 09:41:25 AM »
As I said earlier, in my Jazz road noise is the biggest sound on the motorway, but it is no way what I would call noisy. Car is really pretty quiet. CrossClimate tyres tyres are, at 68db, one of the quieter tyres out there. My new Yokohama tyre is 68db and I chose it because of the low noise.
6
Honda Jazz Mk1 2002-2008 / Re: runs then stops
« Last post by Fouldsy67 on Today at 09:33:39 AM »
Hi all i managed to get a code reader from one of our mechanics and he cleared all codes for me and then rescaned
codes that came up was po118 wont clear  and   ect sencor1 high  so where do i go from here


cheers all your help has been great
7
Honda Jazz Mk1 2002-2008 / Re: too much road noise
« Last post by sparky Paul on Today at 09:28:30 AM »
Car had four random nearly worn out tyres on it when i got it.

...but were they quieter?  ???

As I say, I avoid anything directional now. Don't get me wrong, some are okay, but some are horribly noisy. I think the CrossClimate tyres are known for being quite a noisy tyre.

It could be something else, you might have a wheel bearing on it's way, or a bush gone. It doesn't take much to transmit noise through to the shell. It's just that our Jazz has never struck me as a noisy car.
8
Honda Jazz Mk1 2002-2008 / Re: runs then stops
« Last post by sparky Paul on Today at 09:22:08 AM »
Aaargh.

I would think your next step is a cheap OBDII reader. Hopefully, it should throw some fault code/s up, but if it is immobiliser related, you may need Honda HDS or clone.
9
Hybrid / answering call on sat nav
« Last post by clackers49 on Today at 08:58:24 AM »
I can make calls on my jazz but i can't answer them , the phone rings once on the car speakers then fades i press answer and the call is connected but not through the speakers. anyone else have this problem? anyone have an answer?
10
Honda Jazz Mk1 2002-2008 / Re: runs then stops
« Last post by Fouldsy67 on Today at 04:22:36 AM »
Ok so i have replaced crank cender put on origanal fuel rail and injectors and all plug in parts with air flow still doing same thing
Pages: [1] 2 3 ... 10
anything
Back to top