Clubjazz - Honda Jazz & HR-V Forums

Honda Jazz Forums => Gallery => Topic started by: guest4426 on April 19, 2014, 09:21:01 PM

Title: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: guest4426 on April 19, 2014, 09:21:01 PM
sun was beaming today so i thought it an ideal time to fit the ep3 seats i won off ebay.

the oem blue seats are horrible and uncomfortable so i fitted the ep3 seats using the jazz seat base / rails. no cutting or welding involved and bolt straight in for an oem finish :)

(http://i38.photobucket.com/albums/e138/ej6civicoupe/2014-04-19-085_zps0c5de57a.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/2014-04-19-085_zps0c5de57a.jpg.html)
Title: Re: my gd1 ep3 seats in today
Post by: guest4078 on April 19, 2014, 10:23:41 PM
Nice job. They look smart and comfy.
Title: Re: my gd1 ep3 seats in today
Post by: guest4426 on April 20, 2014, 10:39:16 PM
so much more comfy than oem, i am now looking at doing s2000 seats :)
Title: Re: my gd1 ep3 seats in today
Post by: guest4621 on April 22, 2014, 11:57:17 AM
That looks very nice! I was looking at something like this for my GE6, I just wasn't sure about red with the Blue car thought. I like it!
Title: fresh steering wheel.
Post by: guest4426 on May 17, 2014, 10:24:40 PM
as i had a spare bit of time on my hands i decided to try a few steering wheels i had laid around.
i had an ep2 sport steering wheel on for a few weeks...
(http://i38.photobucket.com/albums/e138/ej6civicoupe/2014-05-16-180_zps89fbe9fe.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/2014-05-16-180_zps89fbe9fe.jpg.html)
now i have decided and fitted the oem accord type r momo steering wheel.......
(http://i38.photobucket.com/albums/e138/ej6civicoupe/2014-05-16-181_zps082738ec.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/2014-05-16-181_zps082738ec.jpg.html)
much nicer in my opinion.
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: guest4078 on May 17, 2014, 11:47:14 PM
I do like the stitching on the sport wheel, but the momo is definitely more 'old school' performance car.
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: Dustygd3 on May 18, 2014, 11:00:20 AM
I like that!  ;)

I like dc5 wheel not sure if that would fit tho

Did the air bag plug fit ok?

Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: guest4426 on May 18, 2014, 09:21:37 PM
a dc5 wheel will fit as its the same as an ep3 wheel.
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: Garyman on May 19, 2014, 11:51:06 AM
Hey brunny,

been away so havent caught up on all the post i'd missed during my 3 weeks off.

Well done on getting the CTR seats in but I'm surprised you say its fits straight in or have i read wrong?

Gary
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: guest4426 on May 21, 2014, 08:42:23 PM
after about an hours work Gary, they bolt straight in on jazz rails :)
Title: jenny jazz's new mods
Post by: guest4426 on May 07, 2015, 08:11:42 PM
its been a while since I posted as I have been busy with other things but I have pulled my finger out and started on the old vajazzle.

first thing I have done is fitted my vogtland 40mm lowering spring and now sits a little better.

I have had my rota circuit 8s powder coated in candy blue which look fresh wrapped in toyo proxe s t1r's

(http://i38.photobucket.com/albums/e138/ej6civicoupe/IMAG04871_zpshhirgem5.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/IMAG04871_zpshhirgem5.jpg.html)

(http://i38.photobucket.com/albums/e138/ej6civicoupe/IMAG04861_zpscdmp7clu.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/IMAG04861_zpscdmp7clu.jpg.html)

the oem backbox I had fitted looked a bit small and inadequate, and after loosing out on a spoon n1 on ebay I had to settle for this  8)
(http://i38.photobucket.com/albums/e138/ej6civicoupe/IMAG04731_zpsdlqpaqmi.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/IMAG04731_zpsdlqpaqmi.jpg.html)
(http://i38.photobucket.com/albums/e138/ej6civicoupe/IMAG04721_zps6qbu7fln.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/IMAG04721_zps6qbu7fln.jpg.html)

and I had a super surprise from my friend who sourced this for me from the far side of the rising sun.......

oem Honda modulo lip kit
(http://i38.photobucket.com/albums/e138/ej6civicoupe/11174384_10205041173283964_1525153768783314952_o_zps7hgcb0zm.jpg) (http://s38.photobucket.com/user/ej6civicoupe/media/11174384_10205041173283964_1525153768783314952_o_zps7hgcb0zm.jpg.html)

more to follow.....
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: Garyman on May 08, 2015, 09:03:24 AM
Just realised that its you Stuart!

We need to meet up as I fancy a DC5 steering wheel and you can help (ie do it for me  :P)
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: guest4426 on May 08, 2015, 09:20:58 AM
Yeah no bother Gary. Lol
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: guest5589 on April 26, 2016, 09:29:38 PM
Holy thread revival but any updates on this? One of these kits are up on eBay so was wondering how it looks?
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: guest7534 on March 04, 2018, 09:54:01 PM
The civic type r seats, you just used the original jazz rails?

No modification required etc?
Title: Re: my gd1 ep3 seats in today-fresh steering wheel too!!
Post by: Rhysfjf on March 07, 2018, 12:09:08 PM
Looks ace! What exhaust is that? Genuine J's or a replica?