Author Topic: Pressure Washer close call  (Read 671 times)

Kremmen

  • Approved Member
  • *
  • Posts: 4576
  • Country: england
  • Civinfo interloper
  • Fuel economy:
  • My Honda: MY22 Jazz EX
Pressure Washer close call
« on: January 21, 2022, 10:49:57 AM »
I've noticed over the years that my decade+ old Nilfisk 130 was getting stiffer to assemble and disassemble. The last use a few days ago was almost impossible.

I was about to go to Argos and get the latest C135 but I thought I' have a closer look at mine.

After some poking and prodding I noticed that the small rubber O rings were very stiff, almost plastic like.

I replaced them and it's like it was when new, easy to assemble and disassemble. Just clicks together  :)

Proper Job.

Let's be careful out there !

aphybrid

  • Approved Member
  • *
  • Posts: 474
  • Country: gb
  • Fuel economy: 54.46
  • My Honda: Jazz Crosstar Shiny Grey
Re: Pressure Washer close call
« Reply #1 on: January 21, 2022, 04:00:27 PM »
Silicone grease also a great help if applied regularly, will also be absorbed by the rubber which also helps sealing.

Tags:
 

Back to top