Clubjazz - Honda Jazz & HR-V Forums

Honda Jazz Forums => Honda Jazz Mk3 2015 - 2020 => Topic started by: Wilmo on April 10, 2024, 12:15:03 PM

Title: Torque setting
Post by: Wilmo on April 10, 2024, 12:15:03 PM

About to put new front discs & pads on our 2018 1.5 Sport.
Have found a Jazz manual from the forum but it's for older models I think.

Found torque setting for the carrier bolts @ 108Nm but wanted to confirm the value for the slider pin bolts.
The manual says 22Nm.

Title: Re: Torque setting
Post by: pebbles on April 12, 2024, 12:11:15 PM

have the same model , checked my Haynes e-manual .

23Nm for the front calliper slider bolt , which is what I set mine at.

Also I used a little non permanent thread lock

Title: Re: Torque setting
Post by: Wilmo on April 12, 2024, 02:32:18 PM

Thanks
set it at 22 but that should be good enough.
used some new bolts that had threadlock on already