Torque setting

[Wilmo]

About to put new front discs & pads on our 2018 1.5 Sport.
Have found a Jazz manual from the forum but it's for older models I think.

Found torque setting for the carrier bolts @ 108Nm but wanted to confirm the value for the slider pin bolts.
The manual says 22Nm.

[pebbles]

have the same model , checked my Haynes e-manual .

23Nm for the front calliper slider bolt , which is what I set mine at.

Also I used a little non permanent thread lock

[Wilmo]

Thanks
set it at 22 but that should be good enough.
used some new bolts that had threadlock on already