Hello again,
I'm starting to get a bit annoyed with this ABS issue now.
I went today to a scrap yard and got only the motor from the abs pump, after the brush holders on my old motor just disintegrated when I tried to replace the brushes.
After putting the motor on the pump I took it for a drive to see if it works. Here comes the interesting part:
1. After a couple of meters I noticed the ABS light turned off and I decided to test the brakes to see if it works. The abs worked as normal but after I stopped completely the light came back on.
So i turned off and on the engine and the light went off again. Then I decided to brake test again and after hearing the abs working and coming to a stand still the light came on again, but now it's not turning off at all.
2. So i decided to take the "new" motor off and replace the brushes(which were really low also). The only problem is that the light is still on.
Does the ABS reset trick with jumping the pins 4&9 in the work on this model of Jazz?