Hi TG
Many thanks, much appreciated
I have watched those videos over many weeks/months and they are DIY, but gave a lot of info for removal of trim
I asked a friend, who is more mechanically minded then me, and he suggested they are a 2 part fitment
So I have just been out to have a look
I think he's right, you fit the LED section first, by sliding the bracket at back of led between the slot on bumper (should go in the large middle section, then slide down and backup to where you want them.
Cut the back trim case of the cover, to allow the LED to push through the trim cover.
So you are correct, fit led first then trim
I tried tonight but it's getting to dark and it is an extremely tight fit, I could not push down the LED, going upwards is easier but not enough room to fit the lower bracket in the slot
Guess I maybe ok just fitting the bottom bracket as it is extremely tight fit
Any ideas on how best to fit them without damaging the paintwork is greatly appreciated
I hope my explanation is easy to follow or understand
Also, as I said I would, and I hope I am breaking forum rules sorry, please see pics of my sill guards and footlights. Had to wait for darkness for door lights
Many thanks
John